What are the problems that are prone to occur in spiral conveyors?

The spiral conveyor is like the nut rotating on the screw without axial movement. When the shaft rotates, the screw blade moves in the groove, the material enters the groove from the feed port, and is transported to the other end along the screw. The outlet is discharged to realize the transportation of raw materials.

So, what problems will occur in the working process of the spiralconveyor?

1. Gearbox oil leakage
It is possible that the shaft end seal is damaged, replace the shaft end seal.

2. The gear box leaks dust
It is possible that the shaft end seal is damaged, replace the seal.

3. Observation window leaks dust
It may be that the observation window is not locked, and the screw of the top rod of the observation window is locked.

4. Motor noise or abnormal sound
It is possible that the motor bearing is damaged. Weld or apply a layer of glass glue at the connection of the half-angle universal joint, and replace the bearing of the same type.

5. Gearbox noise or abnormal sound
It may be that the input bearing is damaged, replace the bearing of the same type;
It is also possible that the lubricating oil is insufficient or insufficient, and the replacement of the lubricating oil is not enough to reach 2/3 of the oil mirror.

6. Spiral pipe noise or abnormal sound
It is possible that the middle suspension shaft is broken, replace the middle suspension shaft.

    We will answer your email shortly!