The flexible conveyor line is mainly to complete the conveying task of its materials. In the site surrounding the warehouse, production workshop and packaging workshop, there are conveyor chains composed of many pu belt conveyors, roller conveyors, etc., which are connected end to end to form a continuous flexible conveyor line. There are and path fork devices, elevators and ground flexible conveying lines at the entrance of the material and at the exit of the sorting conveyor line-conveyor port.
In this way, a circulating conveying line system that can reach various production positions smoothly and at the same time is closed in the warehouse, production workshop and packaging workshop is formed. All related materials, parts, components and finished products used in the production process must be packed in barcoded pallet boxes before entering the conveyor system. Under the action of the production instruction issued by the production management system, the pallet box containing the material enters the flexible conveyor system from the designated entrance.
Check the deviation value of the two planes of the head and tail frame mounting bearing housings. If the deviation of the two planes is greater than 1mm, the two planes should be adjusted in the same plane. The adjustment method of the head drum is: if the conveyor belt deviates to the right side of the drum, the bearing seat on the right side of the drum should move forward or the left bearing seat should move backward; if the conveyor belt deviates to the left side of the drum, the The bearing housing on the left side of the drum should move forward or the bearing housing on the right side should move back. The adjustment method of the tail roller is just the opposite of that of the head roller.